If you're looking for a control mechanism that's good for your back and shoulders, T-handles are your best bet. Because they are shaped like a T, utilizing them is both natural and uncomplicated due to the design that went into creating them. You can grab the very top of a T-handle, and then you can turn it to operate the device that it is connected to. T handles all have the same appearance, but you can purchase them in a wide variety of different configurations depending on your needs.
1. Studded
The difference between studded T-handles and other types of T-handles is that studded T-handles have a stud insert embedded in them. The bottom of the handle is fitted with a threaded rod, which serves as the stud insert. T-handles that are equipped with studs are designed to be utilized with machines or other work-pieces that feature threaded holes in their construction.
2. Having Been Tapped
Some T-handles have been tapped for your convenience. T-handles that have been tapped do not have a stud insert inside of them. Instead, the bottom of the handle has a threaded hole and is tapped, meaning that it has a threaded hole in it. Tapped T-handles are typically put to use in situations in which the machine or the work piece in question includes a bolt or some other type of threaded fastener. A T-handle that has been drilled and tapped can be attached to a screw or bolt that has been threaded.
3. Locking
There is a possibility that you will find T-handles with locks on them. Locking T-handles are T-handles that already have a lock installed inside of them, as their name suggests. In most cases, the lock will be situated in the exact middle of the handle. Locking T-handles can be turned in their unlocked and default states because they are designed to be turned. After it has been moved into the desired location, you can proceed to lock it. The vast majority of locking T-handles are outfitted with a key lock. It is possible to lock it in place by inserting a key into the center and then spinning the key to secure it.
4. Extra-Clearance
The extended clearance T-handle is yet another typical kind of this sort of handle. Extra-clearance T-handles are ideally suited for usage in situations in which there is a restriction on the quantity of available space. The use of any T-handle will result in space consumption. Extra-clearance T-handles are simply more compact than their counterparts, which results in a reduction in the amount of space they require. They still have a handle in the shape of a T, but the length of this particular T-handle is shorter than the length of the majority of other T-handles.
5. A Hole That Goes Through The Object
Last but not least, some T-handles have through-holes in them. T-handles can also be described as through-hole T-handles since they feature a threaded hole that travels through the handle. They are very comparable to T-handles that have been tapped. T-handles can either have a through-hole or a tapped hole; either way, they have a threaded hole. Tapped T-handles, on the other hand, only have a partially threaded hole in the center of the handle.
Below the handle itself, in a tapped T-handle, you'll find the threaded hole that receives the screw. In contrast, the threaded hole in a through-hole T-handle traverses the entire length of the handle itself from end to end. As can be seen, there is a wide variety of options to choose from while shopping for T-handles. The terms studded, tapped, locking, extra-clearance, and through-hole all refer to rather common variations of the T-handle.
